image quality

[★TheLastSamurai]

hey folks, I'm having an issue with the fact that when I save for web in PS cs6, the image seems to lose quality and i'm wondering if anyone knows perhaps where i'm going wrong?

this is what I used when I start making a sig;


these are the settings I use for saving for web;


this is how it looks in PS;


and this is how it looks when I upload in using imageshack;

as you can see there is a slight quality loss when I save it, well that little bit is really irritating me xD
anyone got any suggestion on what I should improve on my settings to increase the quality when uploaden?

have a look at my current sig, it gave in alot of quality from its original pfff >.>

thanks in advice!

[jvega]

i usually put the resolution to 150-300, start at 150

[Gary777]

its ur ppi thats d issue i think its around 75 normally for a good pic it should be 200 to 150 or 250

[OrochimaruFan]

Resolution is too low.

[★TheLastSamurai]

i usually put the resolution to 150-300, start at 150

its ur ppi thats d issue i think its around 75 normally for a good pic it should be 200 to 150 or 250

Resolution is too low.

Thanks for the advice, anything wrong at the "save for web" settings?
let me know if you notice something ^^

[Gary777]

yes the pics that r used in web pages r around 1024 x 680 pixels i think, n u saved a smaller sized pic 500x250 something...when it expands the pixels r very low to the screen resolution or size